ວັດສະດຸສຽງລົດຍົນປັບປຸງຄວາມສະດວກສະບາຍໃນຫ້ອງໂດຍສານໄດ້ແນວໃດ | ຄູ່ມື NVH

How Automotive Acoustic Materials Improve Cabin Comfort

For automotive OEM and Tier 1 engineers, cabin comfort is not simply about reducing a few decibels.

Effective automotive acoustic engineering starts with three fundamental questions:

• ສຽງດັງມາຈາກໃສ?
• How does it travel into the cabin?
• Which material or structural solution is best suited to control it?

In automotive NVH engineering, noise generally reaches the passenger compartment through two primary paths:

• ສິ່ງລົບກວນທາງອາກາດ
• ສິ່ງລົບກວນທີ່ເກີດຈາກໂຄງສ້າງ

Understanding the difference between these two transmission paths is essential when selecting automotive acoustic absorbers, insulation materials, damping layers, decouplers, and multilayer acoustic systems.

ຄໍາຕອບດ່ວນ

Automotive acoustic materials improve cabin comfort by controlling sound and vibration through several different mechanisms.

Porous fiber materials are mainly used to absorb airborne sound.

Damping materials help reduce panel vibration.

Barrier layers reduce sound transmission.

Decoupling materials help limit vibration transfer between structures.

In real vehicle applications, these functions are often combined into an integrated acoustic package rather than relying on a single material to solve every NVH problem.

1. What Is Automotive NVH?

NVH stands for:

• ສຽງ
• ການສັ່ນສະເທືອນ
• ຄວາມໂຫດຮ້າຍ

Together, these factors strongly influence how drivers and passengers perceive vehicle comfort and quality.

ສຽງ

Noise refers to the sound heard by vehicle occupants.

Typical automotive noise sources include:

• Tire and road noise
• ສຽງລົມ
• ສຽງເຄື່ອງຈັກ
• Electric motor noise
• Gear whine
• HVAC noise
• Cooling system noise
• Body-panel radiation

Different frequency ranges create very different subjective impressions.

Low-frequency noise may be perceived as:

• ຂະຫຍາຍຕົວຢ່າງ
• ສະດຸດ
• droning

Higher-frequency noise may be perceived as:

• ສຽງຮ້ອງ
• ອ້າປາກ
• sharp tonal noise
• electric motor high-frequency noise

This is why overall sound pressure level alone cannot fully describe cabin acoustic quality.

ການສັ່ນສະເທືອນ

Vibration originates from mechanical excitation.

ແຫຼ່ງຂໍ້ມູນທົ່ວໄປປະກອບມີ:

• Tire-road interaction
• Suspension movement
• Powertrain excitation
• ເຄື່ອງຈັກໄຟຟ້າ
• ລະບົບເກຍ
• resonance ໂຄງສ້າງ

These vibrations can travel through:

• ອົງປະກອບ suspension
• ຂອບຍ່ອຍ
• chassis
• ແຜງຮ່າງກາຍ
• Seat rails
• ລະບົບການຊີ້ນໍາ

Some vibrations are directly perceived by occupants.

Others excite body panels, which then radiate sound into the cabin.

ຄວາມໂຫດຮ້າຍ

Harshness refers more to the subjective perception of vehicle vibration and sound quality than to a single physical parameter.

ຕົວຢ່າງປະກອບມີ:

• Strong impact when driving over road irregularities
• Excessive low-frequency vibration
• Cabin booming at specific vehicle speeds
• Unpleasant structural resonance

The objective of good NVH engineering is therefore not to eliminate every sound.

It is to control undesirable acoustic and vibration energy.

2. How Does Noise Enter the Vehicle Cabin?

From a transmission-path perspective, automotive cabin noise can generally be divided into two major categories:

Airborne Noise

ແລະ

ສຽງລົບກວນທີ່ເກີດຈາກໂຄງສ້າງ

These two mechanisms require different control strategies.

3. What Is Airborne Noise?

Airborne noise is sound energy that primarily travels through the air before reaching the passenger compartment.

For example, tire-road interaction generates acoustic energy around the wheel area.

Part of that sound travels through air and can enter the vehicle through the floor, wheel arch, doors, or other body structures.

Similarly, HVAC blowers generate sound that travels directly through air ducts and the cabin.

Typical airborne noise sources include:

• ສຽງລົມ
• Tire radiation noise
• HVAC noise
• ສຽງພັດລົມເຢັນ
• Exterior traffic noise
• Some electric motor noise
• Some powertrain noise

Once airborne sound enters the cabin, it can also reflect repeatedly from interior surfaces.

If the vehicle interior has insufficient sound absorption, sound energy may continue reflecting from areas such as:

• ມຸງຫລັງຄາ
• ສາຍຫົວ
• ປະຕູ
• Dashboard
• ຊັ້ນ
• ລໍາຕົ້ນ

This increases the acoustic energy perceived by occupants.

That is why sound-absorbing materials are widely used throughout the vehicle interior.

4. How Do Fibrous Automotive Acoustic Materials Absorb Sound?

PP/PET fibrous acoustic materials are typical porous sound absorbers.

When a sound wave enters the fiber network, air particles move through a complex porous structure.

During this process, acoustic energy is reduced through mechanisms such as:

• Friction between air and fibers
• ການສູນເສຍ viscous
• ການແລກປ່ຽນຄວາມຮ້ອນ
• Energy dissipation caused by airflow through the porous network

A small portion of the acoustic energy is ultimately converted into heat.

As a result, less sound energy is reflected back into the cabin.

This is the basic principle behind fibrous automotive acoustic absorbers.

5. Why Is Thickness Alone Not Enough?

A common assumption is that thicker acoustic material always performs better.

In reality, automotive sound absorption depends on many parameters, including:

• ຄວາມຫນາ
• ນ້ໍາຫນັກພື້ນຖານ
• ຄວາມຫນາແຫນ້ນ
• ເສັ້ນຜ່າສູນກາງເສັ້ນໄຍ
• Fiber structure
• ຄວາມບໍລິສຸດ
• ຄວາມຕ້ານທານກະແສລົມ
• ອັດຕາສ່ວນການບີບອັດ
• ສະພາບການຕິດຕັ້ງ
• Target frequency range

One of the most important parameters is airflow resistance.

If a material is too open, sound can pass through easily, but interaction between the moving air and the fiber network may be insufficient.

If a material is too dense, too much sound may be reflected at the surface instead of entering the porous structure.

High-performance acoustic materials therefore require an appropriate balance between:

Porosity, fiber structure, and airflow resistance.

6. What Is Structure-Borne Noise?

Structure-borne noise begins as mechanical vibration transmitted through the vehicle structure.

ຕົວຢ່າງປົກກະຕິແມ່ນ:

Road excitation

↓

ການສັ່ນສະເທືອນຂອງຢາງລົດ

↓

Suspension

↓

ຂອບຍ່ອຍ

↓

ຮ່າງກາຍຂອງຍານພາຫະນະ

↓

Body-panel vibration

↓

Sound radiation into the cabin

The final sound may still be heard through the air, but the original transmission path was structural.

This is the key difference between structure-borne and airborne noise.

7. Why Can Acoustic Fiber Not Solve All Structure-Borne Noise?

This is one of the most important distinctions in automotive acoustic engineering.

Porous acoustic fiber is mainly designed to absorb airborne sound energy.

If the main problem is strong vibration of a door panel, floor panel, wheelhouse, or another structural component, adding more acoustic fiber alone will not eliminate the root cause.

Structure-borne noise typically requires a combination of several control methods.

ວັດສະດຸປຽກ

Damping layers are used to reduce vibration amplitude in metal or composite panels.

ພື້ນທີ່ຄໍາຮ້ອງສະຫມັກທົ່ວໄປປະກອບມີ:

• Door outer panels
• ແຜງຊັ້ນ
• Wheelhouse areas
• Trunk panels
• ແຜ່ນໂລຫະໃນຮ່າງກາຍ

Decoupling Materials

Decoupling layers help reduce mechanical coupling between structures.

They are also important in multilayer acoustic systems where a compliant layer is required between a barrier and the vehicle body.

ວັດສະດຸກີດຂວາງ

Barrier layers are used to reduce sound transmission.

They typically rely on higher surface mass or multilayer construction to improve transmission loss.

ວັດສະດຸດູດຊຶມ

Absorbing layers reduce airborne sound energy once that energy reaches the cabin or acoustic package.

In practical vehicle design, these functions are often combined as:

Damping + Decoupling + Barrier + Absorption

8. Airborne and Structure-Borne Noise Are Often Coupled

In real vehicle NVH problems, airborne and structure-borne mechanisms are not completely independent.

ຍົກ​ຕົວ​ຢ່າງ:

Road excitation first generates mechanical vibration.

That vibration travels through the suspension and body structure.

The body panel is then excited.

The vibrating panel radiates sound into the cabin air.

The full path may therefore be:

Road Excitation

↓

Structure-Borne Vibration

↓

Body-Panel Vibration

↓

Airborne Sound Radiation

↓

Passenger Perception

For this reason, OEM NVH engineers do not simply ask whether a problem is airborne or structure-borne.

They need to understand:

• Which source is dominant?
• Which transfer path contributes most?
• Which frequency range requires improvement?

9. Different Frequency Ranges Require Different NVH Strategies

No single material can effectively solve every noise problem across the entire frequency spectrum.

Different frequency ranges typically require different engineering strategies.

Low Frequency

Low-frequency problems are often related to:

• ທິບາຍຮູບແບບຂອງຮ່າງກາຍ
• ການສັ່ນສະເທືອນໂຄງສ້າງ
• ການສະທ້ອນຂອງແຜງ
• Suspension excitation
• Powertrain excitation

Severe low-frequency issues usually cannot be solved by lightweight porous absorbers alone.

Typical solutions may include:

• ການເພີ່ມປະສິດທິພາບໂຄງສ້າງ
• ປຽກ
• ການແຍກການສັ່ນສະເທືອນ
• Mount optimization
• Body stiffness optimization

ຄວາມຖີ່ປານກາງ

Mid-frequency noise often requires a combination of:

• ປຽກ
• decoupling
• ການປະຕິບັດອຸປະສັກ
• ການດູດຊຶມສຽງ

Mid-to-High Frequency

Fibrous porous absorbers are particularly useful in the mid-to-high-frequency range.

Their acoustic performance can be tuned by adjusting:

• ຄວາມຫນາ
• ນ້ໍາຫນັກພື້ນຖານ
• Fiber structure
• ຄວາມຕ້ານທານກະແສລົມ

This is why automotive acoustic materials should not be evaluated by a single absorption value.

The full absorption curve across the relevant frequency range is far more meaningful.

10. Why Do Electric Vehicles Change Acoustic Material Requirements?

Electric vehicles do not make NVH engineering easier.

They change the noise spectrum.

In internal-combustion vehicles, engine noise creates a relatively strong background sound that can mask other noise sources.

In electric vehicles, this masking effect is reduced.

As a result, previously less noticeable sounds can become more prominent, including:

• ສຽງຢາງລົດດັງ
• ສຽງ​ດັງ​ຖະ​ຫນົນ​ຫົນ​ທາງ​
• ສຽງລົມ
• ສຽງດັງຂອງມໍເຕີໄຟຟ້າ
• ສຽງເກຍ
• Inverter tonal noise
• HVAC noise
• Cooling-system noise

EV acoustic design therefore places greater emphasis on:

• ການດູດຊຶມສຽງບຣອດແບນ
• Mid-to-high-frequency noise control
• ນ້ຳໜັກເບົາ
• ການເຊື່ອມໂຍງວັດສະດຸ
• Local acoustic optimization

11. Why Are Lightweight Acoustic Materials Becoming More Important?

Adding more NVH material can improve acoustic performance.

However, additional material also increases vehicle mass.

This can directly affect:

• ນ້ ຳ ໜັກ ຍານພາຫະນະ
• ການໃຊ້ພະລັງງານ
• EV driving range
• ຄ່າໃຊ້ຈ່າຍໃນການຜະລິດ
• ຄວາມສັບສົນຂອງສະພາແຫ່ງ

For this reason, the goal is not simply to add more material.

The objective is to achieve the required acoustic performance with lower weight and less installation space.

This is one of the main advantages of fibrous automotive acoustic materials.

ໂດຍການປັບ:

• ອົງປະກອບຂອງເສັ້ນໄຍ
• ນ້ໍາຫນັກພື້ນຖານ
• ຄວາມຫນາ
• ຄວາມຫນາແຫນ້ນ
• ໂຄງສ້າງຊັ້ນ

the material can be optimized for different locations and vehicle platforms.

12. Where Are Automotive Acoustic Materials Used?

Different vehicle zones have different acoustic requirements.

Roof and Headliner

Typical concerns include:

• ສຽງລົມ
• Cabin reverberation
• Rain impact noise
• ການດູດຊຶມສຽງບຣອດແບນ

Low weight is particularly important in this area.

ປະຕູ

Door systems may be affected by:

• Exterior airborne noise
• Door-panel vibration
• Cavity resonance
• Speaker interaction

For this reason, door acoustic systems often require both absorption and structural vibration control.

Firewall and Dashboard Area

This is one of the most important NVH control zones.

Typical noise sources include:

• Powertrain noise
• ສຽງ​ດັງ​ຖະ​ຫນົນ​ຫົນ​ທາງ​
• HVAC noise
• Structural radiation

Multilayer acoustic systems are commonly used here rather than a single absorber.

ຊັ້ນ

Typical concerns include:

• Tire-road excitation
• Suspension noise
• Underbody noise
• ການສັ່ນສະເທືອນໂຄງສ້າງ

Common floor acoustic systems may include:

Absorber + Decoupler + Barrier

with localized damping where necessary.

Wheel Arch

The wheel area is one of the most important noise sources in the vehicle.

Acoustic materials used here may need to address:

• ສຽງຢາງລົດດັງ
• Road excitation
• Stone impact
• ການເປີດເຜີຍນ້ໍາ
• ການປົນເປື້ອນ

Therefore, material selection must also consider:

• ຄວາມຕ້ານທານຄວາມຊຸ່ມ
• ຄວາມທົນທານ
• ຕ້ານການປົນເປື້ອນ

ລໍາຕົ້ນ

Rear-wheel and rear-body excitation can introduce significant acoustic energy into the trunk cavity.

Absorptive materials can reduce cavity reflection and help limit further sound propagation toward the passenger compartment.

Pillars and Body Cavities

Vehicle cavities can act as acoustic transmission paths.

Proper use of:

• Acoustic absorbers
• Cavity fillers
• ລະບົບການຜະນຶກ

can reduce sound transmission through these areas.

13. Which Material Parameters Should OEM Engineers Evaluate?

Automotive acoustic materials should not be evaluated only by whether they are “good at absorbing sound.”

A more complete evaluation should include the following parameters.

ການສະແດງອອກສຽງ

• ຄ່າສໍາປະສິດການດູດສຽງ
• Frequency-dependent absorption curve
• ຄວາມຕ້ານທານກະແສລົມ
• ຄວາມຕ້ານທານກະແສລົມ

Physical Properties

• ຄວາມຫນາ
• ນ້ໍາຫນັກພື້ນຖານ
• ຄວາມຫນາແຫນ້ນ
• ການຟື້ນຟູການບີບອັດ
• ສະຖຽນລະພາບດ້ານມິຕິ

ຜົນງານດ້ານສິ່ງແວດລ້ອມ

• ຄວາມຕ້ານທານຄວາມຮ້ອນ
• ຄວາມຕ້ານທານຄວາມຊຸ່ມ
• ການຕໍ່ຕ້ານອາຍຸ

ຂໍ້ກຳນົດດ້ານຍານຍົນ

• ຄວາມອັກເສບ
• VOC performance
• ກິ່ນ
• ໝອກ
• ຄວາມເຂົ້າກັນໄດ້ຂອງວັດສະດຸ

ປະສິດທິພາບການປຸງແຕ່ງ

• ຕາຍຕັດ
• ການອົບອຸ່ນ
• ການເຄືອບ
• ການຍຶດຕິດດ້ວຍຕົນເອງ
• Aluminum foil lamination
• Complex-shape conversion

ຄວາມຍືນຍົງ

• ນ້ຳໜັກເບົາ
• ການ ນຳ ກັບມາໃຊ້ ໃໝ່
• Material simplification
• ເນື້ອ​ໃນ​ທີ່​ນໍາ​ມາ​ໃຊ້​ໃຫມ່​

14. Why Is Installation Condition as Important as Material Data?

The same acoustic material can perform very differently under different installation conditions.

ປັດ​ໄຈ​ທີ່​ສໍາ​ຄັນ​ປະ​ກອບ​ມີ​:

• ຊ່ອງຫວ່າງທາງອາກາດ
• ການບີບອັດ
• Backing surface
• ພື້ນທີ່ຕິດຕັ້ງ
• Geometry
• Edge leakage
• Adjacent materials
• ການກໍ່ສ້າງຫຼາຍຊັ້ນ

For example, a material with a free-state thickness of 20 mm may behave very differently if compressed to 8 mm after installation.

Compression can change:

• ຄວາມບໍລິສຸດ
• ຄວາມຕ້ານທານກະແສລົມ
• Effective thickness
• ການສະແດງອອກສຽງ

This is why automotive acoustic materials should not be evaluated only from laboratory datasheets.

Final installed condition must also be considered.

15. Transulate™ Automotive Acoustic Materials

ແປ™ is a PP/PET bicomponent fiber material series developed by SINOYQX for automotive acoustic and thermal-management applications.

The material is designed for applications including:

• Automotive sound absorption
• ການສນວນຄວາມຮ້ອນ
• Lightweight acoustic packages

ພື້ນທີ່ຄໍາຮ້ອງສະຫມັກທົ່ວໄປປະກອບມີ:

• ມຸງຫລັງຄາ
• ສາຍຫົວ
• ປະຕູ
• Dashboard
• Firewall
• ຊັ້ນ
• ລໍາຕົ້ນ
• ເສົາຄ້ໍາ
• ຕົບແຕ່ງພາຍໃນ

Depending on the project, key material parameters can be customized, including:

• ນ້ໍາຫນັກພື້ນຖານ
• ຄວາມຫນາ
• ຄວາມຫນາແຫນ້ນ
• Fiber structure
• Lamination structure

16. How to Select the Transulate™ Series

ແປ™ LT Series

Typical basis weight:

100–200 g/m²

ຄວາມໜາປົກກະຕິ:

10–20 ມມ

Suitable for lightweight applications such as:

• ມຸງຫລັງຄາ
• ສາຍຫົວ
• ປະຕູ
• ເສົາຄ້ໍາ
• ຕົບແຕ່ງພາຍໃນ

The key focus is low weight.

ແປ™ AP Series

Typical basis weight:

300–500 g/m²

ຄວາມໜາປົກກະຕິ:

20–30 ມມ

ທີ່​ເຫມາະ​ສົມ​ສໍາ​ລັບ​ການ:

• Firewall
• ປະຕູ
• ຊັ້ນ
• ລໍາຕົ້ນ
• General acoustic packages

Transulate™ HP Series

Typical basis weight:

600–900 g/m²

ຄວາມໜາປົກກະຕິ:

30–50 ມມ

Suitable for applications requiring higher sound absorption and where more installation space is available.

17. What Additional Processing Options Are Available?

Depending on OEM and Tier 1 project requirements, Transulate™ can be supplied or converted as:

• ມ້ວນ
• ແຜ່ນເຫຼັກ
• ຊິ້ນສ່ວນຕັດ
• Self-adhesive parts
• Aluminum-foil laminated products
• Nonwoven-faced products
• Multilayer composites
• ຄວາມຫນາທີ່ກໍາຫນົດເອງ
• Customized basis weight

The final acoustic structure should be selected according to:

Target Frequency + Installation Location + Available Space + Weight Target

18. Automotive Acoustic Engineering Is Moving from Material Selection to System Design

The future of automotive NVH development is not simply about identifying which absorber has the highest sound absorption coefficient.

ຄຳຖາມທີ່ສຳຄັນກວ່ານັ້ນຄື:

• Which noise source is dominant?
• Which transfer path is most important?
• Which frequency range needs improvement?
• Which material is best suited to the location?
• How can the target performance be achieved with less weight?

A more effective development process is:

Identify the Noise Source

↓

Analyze the Transfer Path

↓

Define the Target Frequency

↓

Select the Control Strategy

↓

ຈັບຄູ່ວັດສະດຸ

↓

Validate at Component Level

↓

Validate at Vehicle Level

This is how material performance can be converted into real cabin comfort.

ສະຫຼຸບ

Vehicle cabin comfort is not controlled by a single material.

Airborne noise is mainly managed through:

Sound absorption and sound insulation.

Structure-borne noise generally requires:

Damping, vibration isolation, decoupling, and structural optimization.

Fibrous automotive acoustic materials play an important role in reducing airborne sound energy, limiting cabin reflections, and improving mid-to-high-frequency acoustic performance.

This becomes even more important in electric vehicles, where reduced engine masking makes tire noise, wind noise, and electric-drive tonal noise more noticeable.

At the same time, vehicle manufacturers continue to reduce weight.

For this reason, the next generation of automotive acoustic systems is not about adding more material.

ມັນ​ແມ່ນ​ກ່ຽວ​ກັບ:

Using the right material, in the right location, for the right frequency range.

Transulate™ automotive acoustic materials can be customized according to OEM and Tier 1 requirements, including application location, target frequency, thickness, basis weight, lamination structure, and annual demand.

ຄໍາ​ຖາມ​ທີ່​ຖືກ​ຖາມ​ເລື້ອຍໆ

What is the difference between airborne noise and structure-borne noise in a vehicle?

Airborne noise travels primarily through air, such as wind noise, HVAC noise, and some tire noise.

Structure-borne noise begins as mechanical vibration transmitted through the suspension, body, or other structural components before being radiated as sound.

Can automotive acoustic fiber directly reduce structure-borne noise?

ບໍ່ສົມບູນ.

Porous fibrous materials primarily absorb airborne sound.

If the main problem is structural panel vibration, additional damping, isolation, decoupling, or structural optimization is usually required.

What are the most important parameters for automotive sound absorbers?

Important parameters include thickness, basis weight, fiber structure, airflow resistance, absorption performance across frequency, compression condition, installation gap, and target frequency range.

Why are lightweight acoustic materials important for electric vehicles?

Electric vehicles have less engine masking noise, so tire noise, wind noise, electric motor noise, and other high-frequency sounds become more noticeable.

At the same time, lower vehicle mass helps improve energy efficiency and driving range.

Where can Transulate™ automotive acoustic materials be used?

Typical applications include roof, headliner, doors, firewall, dashboard, floor, trunk, pillars, and interior trim.

The final material specification should be selected according to installation space, target frequency, basis weight, and thickness requirements.